A Better Way To Haul Your Gear!
For years, the only way to interchangeably attach accessories to a vehicle has been with the standard two-inch hitch receiver, but this has three characteristics that limit its usefulness:
1. Only one accessory at a time can be attached to the hitch receiver.
2. The loose fit within the hitch receiver allows excessive accessory rattle.
3. Being a single mounting point, the hitch receiver provides poor lateral stability and strength, limiting your ability to use the full width of your vehicle.

The Mount-n-Lock^TM Advanced Cargo Mounting System solves these problems!

Through a combination of vehicle-mounted rails and clamp-equipped accessories, Mount-n-Lock is able to overcome these hurdles. Mount-n-Lock™ is a revolutionary, patent-pending approach to vehicle accessory attachment. It is designed to allow the mounting of multiple accessories anywhere along a rail while minimizing or eliminating accessory movement once a clamp is engaged.  Gone are the days where you were limited to one accessory per vehicle; now you're only limited by your own imagination (and the carrying capacity of the vehicle ;-).

The Mount-n-Lock^TM Rail
The backbone of this revolutionary cargo mounting system is the rail. As an aluminum extrusion, the rail combines style, strength and low weight to meet most accessory mounting needs.  The rail bolts directly to the vehicle's frame via our available steel mounting struts, replacing or supplementing your vehicle's rear bumper.  By attaching directly to the frame, the rail provides the highest strength possible.

The Mount-n-Lock^TM Clamp
If the rail is the backbone, then the clamp is the heart of the Mount-n-Lock™ advanced cargo mounting system.  Many years have been spent perfecting the design, making it easy to use and maintain, while providing the strength and security to keep your cargo where it belongs. With its unique, patent-pending design, this innovative product allows you to quickly attach, remove, and reposition accessories anywhere along the rail.  The clamps jaws and body are made from the same low-weight, high-strength extruded aluminum as the rails, with weather-resistant steel hinge pins completing the assembly.

The Mount-n-Lock^TM Accessories
With just two accessories, Mount-n-Lock™ opens up a world of cargo-hauling possibilities.

Our EZ-Mate Adapter allows you to reuse your existing receiver hitch accessories - and take advantage of any new hitch accessories that might strike your fancy.  Be it a hitch-mounted grill, cargo tray, or spare tire carrier, our EZ-Mate Adapter allows you to quickly and easily mount it on your vehicle.  Even more amazing, you can mount all three at the same time!  Every year, innovative new hitch-accessories hit the market; with the Mount-n-Lock™ EZ-Mate Adapter, you'll be ready to take full advantage.

Our EZ-Tray Cargo Carrier provides you a strong, lightweight platform to haul your gear.  At less than 20 pounds for a 30" x 30" platform, this all-aluminum tray is the lightest on the market, significantly reducing the amount of trailer counter balancing needed.  Mount three EZ-Tray Cargo Carriers side by side, and you have a 7 1/2 foot wide cargo platform...that only adds 60 pounds of weight to your vehicle!

The rail, clamp and accessories described above exist to serve one purpose: To better facilitate the quick and secure attachment of cargo to a vehicle. What's more, thanks to the Mount-n-Lock™ clamp, you no longer need to stoop, crouch, or kneel when attaching an accessory; just hang it on the rail and insert the retaining pin as the accessory's weight creates the clamping force needed to hold everything in place.  Once you've experienced the ease of Mount-n-Lock™, you'll never want to go back to receiver hitch mounted accessories again.